About this deal
Weight:
Simply apply a small amount of PolyWatch to the crystal and polish with a cotton cloth. This 5-gram tube that is sufficient for approximately 10-12 uses. We stand behind their craftsmanship and guarantee them to be free of any manufacturing defects. One tube is enough for 10+ watch glasses. Contents: 30ml Spray, 1 x Polishing Cloth, 1 x Microfibre Cloth and Instructions.
- Apply PolyWatch to the watch crystal
- Polish the scratched areas for 2-3 minutes with great pressure at a right angle to the scratches
- Finally, remove any remaining PolyWatch with a cloth.
- Deep scratches need to be treated more than once
- The edges of the scratch marks are then smoothed off
- The plastic glass is very slightly dissolved and ground down by tiny abrasive particles
- The cracks filled in with some of the original plastic from the watch crystal
- 18 oz / 5 g
- 0.
- Use a piece of cotton wool or Selvyt ( polishing cloth )
Reviews
titan177
Worked quite well. I would like to see more product in the syringe as it runs out very quickly. I'm sure if I spent even more time I could make it almost perfect.
John Walker
It takes dedication to rub hard for 3 minutes with that little wooden spatula, but it works. Overall it’s done a decent job and I’m happy. Apple Watch series 4.
Fionn
I followed the instructions in the video they mention in the instruction leaflet and after one application the above is the result the watch is as new and im a fussy git! Would have given 5 start but was a pain to do. I discovered this product on reddit and decided to give it a go. It took a while but the end results were worth it.
ChrisM
This product has worked pretty well, however, I have had to buy three of these kits over the course of a month or so and spend about 3 hours going at it. The media could not be loaded. It has required a lot of effort. After an hour and several 3 minute polishing sessions I managed to polish out the scratch.
Christine
! Very happy with the result.