Joined in 2023 
82 
63 About this deal
Monitor Arm - Benefits
Or, you can angle the monitors toward each other to create a more immersive view. The slide-in VESA plate allows you to install the mount to the wall, connect the plates to your monitors, and then slide the monitors into the wall mount with ease. The integrated cable management system allows you to hide unsightly wires and keep your workspace clutter free. It fits all monitor models with 75mm and 100mm VESA holes and manages all cables beneath the arm to maintain a neat and stylish finish. The Wall Mounted Universal Screen Mount / Monitor Arm mounts computer monitors and small plasma screens to the wall, enabling screens to be extended 64cm, tilted 75° and rotated between portrait and landscape, while the arm itself swivels 360° and has a height-adjustment range of 13”. 6kg in weight. With 180 degree rotation, this monitor mount allows you to switch one of the monitors to portrait mode, while the other is in landscape mode.
Screen Mount - Features
- Arm swivels up to 180° at base, 360° at extension and extends up to 25”
- Aluminium frame offers great durability and a stylish appearance
- Cable management inside arm maintains neat appearance
- Also available with a bracket for holding laptops instead of LCD screens
- Easy-to-use allowing multiple adjustments within touching distance
- 5-year warranty
- Arm swivels 180° at base, 360° at extension and extends up to 16.
- Provides 5inch of height adjustment for greater ergonomics
- Accommodates screens up to 13.
Reviews
Peter
With two 28" monitors side-by-side, I found there was roughly 17cm of clearance needed behind the mount base (or table edge) to get them to meet in the middle, slightly forward of the mount base. I used my own which has added grip, so was able to loosen them without issue. Cheap mounts you're lucky for it to hold up a light monitor and you have to loosen parts to adjust it to then tighten it again after.
Scott
All in all though, delighted with this product. The build quality of the product is outstanding I would say, and it supports my 27 inch monitor no problem. One thing to note though is that if your desk is against a wall this will give you problems: The arms need room to hang over the back of your desk to get your monitors in the right position if you have larger monitors.
Scott McMahon
The only problem is the tilt mechanism. Otherwise the arms hit the wall behind and the monitors cannot not be closed together.
Steven John
I needed a stand that could position the monitor about 6 inches forward and several inches lower than the desk mounting point. Definitely make sure you add a length of hardwood if you are using corregated cardboard desk (like most IKEA desks). At first I used the enclosed grub screws to lock the displays in a horizontal position.
nathan1111
Also those that want a Dual monitor config mount & purchase the Ergotron LX tall pole (Which is optimised for Dual arms) I can confirm as this is the same product it can fit onto the Tall pole. It took around 20 minutes to properly set the monitors up.
P. Lee
I used a block of wood under mine in the clamp due to the design of my desk as the clamp didn't sit well enough on the metal bar, it was slipping off and really the bar was too small so I would recommend getting a block of wood if your desk is like this and you want it to be more sturdy. I have two 28" Acer monitors attached to this and it works beautifully.
Marcus Jay
Ok:Amazing arm for **most** monitors. It's definitely sturdy enough, haven't had to move anything since set up. The smaller allen bolts are very stiff, and the included wrench is your run of the mill cheapy. The only word of warning I have is regarding the clearance required behind the mount; If you have your table up against a wall (as I do), you may run into issues with the arms not having enough clearance to bend into position.
Related:
Great Deal 
New Comment